The product
The white gold of the Oro pair. Same application latitude and the same one-coat coverage as Oro Puro, in a cooler metallic register.
Where it is used
- Interior wall surfaces
- Accent and feature areas
- Decorative detail over base coats
Substrates
- Fully cohesive interior substrates
- Prepared base coats
Application data
Coverage, thickness, mix and cure, as declared by the manufacturer. Site conditions in the Gulf sit at the top of most of these ranges — allow for it in the programme.
| Coverage | 10 m²/L, varying with the surface |
|---|---|
| Application | Sponge, brush, roller or steel trowel; PE7 sponge on fresh material to even out |
| Coats | Gloss, coverage, adhesion and washability achievable in one coat |
| Specific weight | 1.10 ± 0.05 kg/L |
| Packaging | 62 ml · 750 ml |
| Cleaning | Latte Detergente, 50 ml in 1 litre of water |
Performance data
Every figure below is reproduced from the manufacturer's own technical data sheet, with the test standard it was measured against. The sheet itself is in the download section.
| Property | Result | Standard |
|---|---|---|
| Coverage | 10 m²/L | Giorgio Graesan data sheet |
| Specific weight | 1.10 ± 0.05 kg/L | Giorgio Graesan data sheet |
| Washability | Washable without additional protection | Giorgio Graesan data sheet |
Where not to use it
The limits are as much a part of the specification as the performance. Everything here is stated on the manufacturer's data sheet.
- Interior wall surfaces only
- Effect depends heavily on tool and technique — approve a panel
- Supplied in small pack sizes
Decorative metallic finish: Giorgio Graesan Oro Bianco applied at approximately 10 m²/L over the prepared base coat, tool and technique to the approved sample panel.
Square brackets mark the choices that belong to the project. Send us the finishes schedule and we will return the clause completed, with the sample and mock-up programme against it.
Documents
Every document is the manufacturer's own, reproduced in full and unaltered under our cover. Free to download, no form.
-
ORO Decorative finishes · Colour & range sheet · 3 pp · 0.6 MBDownload (PDF, 0.6 MB)
-
ORO Decorative finishes · Product guide · 21 pp · 3.1 MBDownload (PDF, 3.1 MB)
-
ORO Decorative finishes · Colour & range sheet · 9 pp · 0.6 MBDownload (PDF, 0.6 MB)
-
ORO Decorative finishes · Colour & range sheet · 17 pp · 3.7 MBDownload (PDF, 3.7 MB)
-
Oro Bianco Decorative finishes · Technical data sheet · 3 pp · 0.6 MBDownload (PDF, 0.6 MB)
-
Oro Puro Decorative finishes · Technical data sheet · 3 pp · 0.6 MBDownload (PDF, 0.6 MB)
The rest of the decorative finishes range
Technical support for the design team
We supply the material and we apply it, so the specification and the workmanship sit with one party. Send a finishes schedule, an elevation or a mood board and we will come back with the system, the build-up, the sample programme and a completed clause.
