The product
Euphoria in the gold register. Same build-up, same 1 m²/kg coverage, same protective options — the difference is the sequin colour.
Where it is used
- Interior wall surfaces
- Feature walls with a light-catching surface
- Hospitality and retail interiors
Substrates
- Fully cohesive interior substrates
- Plasterboard, with an insulating primer
- Tiles, degreased and coated with Primus Aggrappante
Application data
Coverage, thickness, mix and cure, as declared by the manufacturer. Site conditions in the Gulf sit at the top of most of these ranges — allow for it in the programme.
| Base coat | Primus Sabbia or Primus Naturale at 6 – 7 m²/L |
|---|---|
| Coverage | 1 m²/kg |
| Protective coat | Vetro Lucido at 7 – 8 m²/L, or Iper Vetro |
| Specific weight | 1.25 ± 0.05 kg/L |
| Packaging | 8 kg · 4 kg |
| Cleaning | Latte Detergente, 50 ml in 1 litre of water |
Performance data
Every figure below is reproduced from the manufacturer's own technical data sheet, with the test standard it was measured against. The sheet itself is in the download section.
| Property | Result | Standard |
|---|---|---|
| Coverage | 1 m²/kg | Giorgio Graesan data sheet |
| Specific weight | 1.25 ± 0.05 kg/L | Giorgio Graesan data sheet |
Where not to use it
The limits are as much a part of the specification as the performance. Everything here is stated on the manufacturer's data sheet.
- Interior wall surfaces only
- Insulating primer especially recommended on plasterboard
- Coverage is 1 m²/kg — check the take-off before ordering
Decorative finish: Giorgio Graesan Euphoria Oro applied at 1 m²/kg over Primus [Sabbia / Naturale] base at 6–7 m²/L, to the approved sample panel. Insulating primer to all plasterboard substrates.
Square brackets mark the choices that belong to the project. Send us the finishes schedule and we will return the clause completed, with the sample and mock-up programme against it.
Documents
Every document is the manufacturer's own, reproduced in full and unaltered under our cover. Free to download, no form.
-
EUPHORIA Decorative finishes · Product profile · 10 pp · 1.3 MBDownload (PDF, 1.3 MB)
-
EUPHORIA Decorative finishes · Product guide · 35 pp · 9.4 MBDownload (PDF, 9.4 MB)
-
Euphoria Bianco Decorative finishes · Technical data sheet · 3 pp · 0.7 MBDownload (PDF, 0.7 MB)
-
EUPHORIA BIANCO Decorative finishes · Colour & range sheet · 12 pp · 0.8 MBDownload (PDF, 0.8 MB)
-
Euphoria Oro Decorative finishes · Technical data sheet · 3 pp · 0.7 MBDownload (PDF, 0.7 MB)
-
EUPHORIA ORO Decorative finishes · Colour & range sheet · 12 pp · 0.9 MBDownload (PDF, 0.9 MB)
-
EUPHORIA Decorative finishes · Application guidelines · 2 pp · 5.8 MBDownload (PDF, 5.8 MB)
The rest of the decorative finishes range
Technical support for the design team
We supply the material and we apply it, so the specification and the workmanship sit with one party. Send a finishes schedule, an elevation or a mood board and we will come back with the system, the build-up, the sample programme and a completed clause.
