Skip to content
CONMARBLENATURAL FINISHES Book a showroom tour
Home / Specify / Decorative finishes / Fili di Seta
Hand-applied smooth wall finish at the Omorovicza spa, London
Decorative finishes — technical data

Fili di Seta

Decorative interior paint

Manufacturer Giorgio Graesan & Friends
Country of origin Italy
System family Decorative finishes
Supplied and applied by Conmarble Natural Finishes

The product

A silk-thread decorative paint with the highest coverage in the range at 9 to 10 m²/L. Fully washable once protected, which makes it a candidate for circulation and back-of-house areas.

Where it is used

  • Interior wall surfaces
  • Circulation and back-of-house where washability matters
  • Residential and hospitality interiors

Substrates

  • Fully cohesive interior substrates
  • Plasterboard, with an insulating primer
  • Tiles, with Primus Aggrappante

Application data

Coverage, thickness, mix and cure, as declared by the manufacturer. Site conditions in the Gulf sit at the top of most of these ranges — allow for it in the programme.

Base coat Primus Sabbia or Primus Naturale at 6 – 7 m²/L
Coverage 9 – 10 m²/L
Protective coat Vetro at 9 – 10 m²/L, Vetro Opaco or Iper Vetro
Specific weight 1.20 kg/L
Packaging 1 · 2.5 · 5 litres
Cleaning Latte Detergente, 50 ml in 1 litre of water

Performance data

Every figure below is reproduced from the manufacturer's own technical data sheet, with the test standard it was measured against. The sheet itself is in the download section.

Property Result Standard
Coverage 9 – 10 m²/L Giorgio Graesan data sheet
Specific weight 1.20 kg/L Giorgio Graesan data sheet
Washability Fully washable when protected with Vetro, Vetro Opaco or Iper Vetro Giorgio Graesan data sheet

Where not to use it

The limits are as much a part of the specification as the performance. Everything here is stated on the manufacturer's data sheet.

  • Interior wall surfaces only
  • Washability requires the protective coat to be specified
  • For a fully smooth result, self-levelling putty and an insulating bonding agent are needed first
Specification clause

Decorative finish: Giorgio Graesan Fili di Seta in colour [ref], applied at 9–10 m²/L over Primus [Sabbia / Naturale] base at 6–7 m²/L, to the approved sample panel. Protective coat of [Vetro / Vetro Opaco / Iper Vetro] to achieve full washability.

Square brackets mark the choices that belong to the project. Send us the finishes schedule and we will return the clause completed, with the sample and mock-up programme against it.

Documents

Every document is the manufacturer's own, reproduced in full and unaltered under our cover. Free to download, no form.

The rest of the decorative finishes range

Gioia Decorative paint Oro Puro Metallic decorative finish Oro Bianco Metallic decorative finish Euphoria Bianco Marble chips and sequins Euphoria Oro Marble chips and sequins Minimal Matt decorative interior paint Morbido Tocco Interior paint La Via Lattea Decorative paint

Technical support for the design team

We supply the material and we apply it, so the specification and the workmanship sit with one party. Send a finishes schedule, an elevation or a mood board and we will come back with the system, the build-up, the sample programme and a completed clause.

Send your finishes schedule Visit the showroom
Continue
Delivered projectsWhere this system is already installed.The specification hubEvery product, family and document in one place.Upload a scheduleSend a finishes schedule or bill of quantities for review.See it in personEvery range on real walls, by appointment.