Skip to content
CONMARBLENATURAL FINISHES Book a showroom tour
Home / Specify / Decorative finishes / Euphoria Bianco
Hand-applied smooth wall finish at the Omorovicza spa, London
Decorative finishes — technical data

Euphoria Bianco

Marble chips and sequins

Manufacturer Giorgio Graesan & Friends
Country of origin Italy
System family Decorative finishes
Supplied and applied by Conmarble Natural Finishes

The product

A heavy decorative finish carrying marble chips and sequins, supplied by weight rather than volume. At 1 m² per kg it is the most material-hungry finish in the range, and quantities need to be taken off carefully.

Where it is used

  • Interior wall surfaces
  • Feature walls with a light-catching surface
  • Hospitality and retail interiors

Substrates

  • Fully cohesive interior substrates
  • Plasterboard, with an insulating primer
  • Tiles, degreased and coated with Primus Aggrappante

Application data

Coverage, thickness, mix and cure, as declared by the manufacturer. Site conditions in the Gulf sit at the top of most of these ranges — allow for it in the programme.

Base coat Primus Sabbia or Primus Naturale at 6 – 7 m²/L
Coverage 1 m²/kg
Protective coat Vetro Lucido at 7 – 8 m²/L, or Iper Vetro
Specific weight 1.25 ± 0.05 kg/L
Packaging 8 kg · 4 kg
Cleaning Latte Detergente, 50 ml in 1 litre of water

Performance data

Every figure below is reproduced from the manufacturer's own technical data sheet, with the test standard it was measured against. The sheet itself is in the download section.

Property Result Standard
Coverage 1 m²/kg Giorgio Graesan data sheet
Specific weight 1.25 ± 0.05 kg/L Giorgio Graesan data sheet

Where not to use it

The limits are as much a part of the specification as the performance. Everything here is stated on the manufacturer's data sheet.

  • Interior wall surfaces only
  • Insulating primer especially recommended on plasterboard
  • Coverage is 1 m²/kg — check the take-off before ordering
Specification clause

Decorative finish: Giorgio Graesan Euphoria Bianco applied at 1 m²/kg over Primus [Sabbia / Naturale] base at 6–7 m²/L, to the approved sample panel. Insulating primer to all plasterboard substrates. Protective coat of [Vetro Lucido / Iper Vetro] where scheduled.

Square brackets mark the choices that belong to the project. Send us the finishes schedule and we will return the clause completed, with the sample and mock-up programme against it.

Documents

Every document is the manufacturer's own, reproduced in full and unaltered under our cover. Free to download, no form.

The rest of the decorative finishes range

Gioia Decorative paint Oro Puro Metallic decorative finish Oro Bianco Metallic decorative finish Euphoria Oro Marble chips and sequins Fili di Seta Decorative interior paint Minimal Matt decorative interior paint Morbido Tocco Interior paint La Via Lattea Decorative paint

Technical support for the design team

We supply the material and we apply it, so the specification and the workmanship sit with one party. Send a finishes schedule, an elevation or a mood board and we will come back with the system, the build-up, the sample programme and a completed clause.

Send your finishes schedule Visit the showroom
Continue
Delivered projectsWhere this system is already installed.The specification hubEvery product, family and document in one place.Upload a scheduleSend a finishes schedule or bill of quantities for review.See it in personEvery range on real walls, by appointment.