Skip to content
CONMARBLENATURAL FINISHES Book a showroom tour
Home / Specify / Decorative finishes / La Via Lattea
Hand-applied smooth wall finish at the Omorovicza spa, London
Decorative finishes — technical data

La Via Lattea

Decorative paint

Manufacturer Giorgio Graesan & Friends
Country of origin Italy
System family Decorative finishes
Supplied and applied by Conmarble Natural Finishes

The product

A two-coat decorative paint applied by roller or brush, for interior wall surfaces of various kinds. Protective coating is optional and depends on the exposure.

Where it is used

  • Interior wall surfaces of various kinds
  • Residential and hospitality interiors

Substrates

  • Fully cohesive interior substrates
  • Plasterboard, with an insulating primer
  • Tiles, with Primus Aggrappante

Application data

Coverage, thickness, mix and cure, as declared by the manufacturer. Site conditions in the Gulf sit at the top of most of these ranges — allow for it in the programme.

Base coat Primus Sabbia or Primus Naturale at 6 – 7 m²/L
Coverage 6 – 7 m²/L over two coats
Protective coat Vetro at 7 – 8 m²/L, or Iper Vetro
Application PE15 roller or PE10 brush
Specific weight 1.23 ± 0.03 kg/L
Packaging 1 · 2.5 · 5 litres
Cleaning Latte Detergente, 50 ml in 1 litre of water

Performance data

Every figure below is reproduced from the manufacturer's own technical data sheet, with the test standard it was measured against. The sheet itself is in the download section.

Property Result Standard
Coverage 6 – 7 m²/L over two coats Giorgio Graesan data sheet
Specific weight 1.23 ± 0.03 kg/L Giorgio Graesan data sheet

Where not to use it

The limits are as much a part of the specification as the performance. Everything here is stated on the manufacturer's data sheet.

  • Interior wall surfaces only
  • Plasterboard requires an insulating primer
  • For a fully smooth result, skimming plaster and an insulating fixative are needed first
Specification clause

Decorative finish: Giorgio Graesan La Via Lattea in colour [ref], two coats applied by [PE15 roller / PE10 brush] at 6–7 m²/L over Primus [Sabbia / Naturale] base, to the approved sample panel. Insulating primer to all plasterboard substrates.

Square brackets mark the choices that belong to the project. Send us the finishes schedule and we will return the clause completed, with the sample and mock-up programme against it.

Documents

Every document is the manufacturer's own, reproduced in full and unaltered under our cover. Free to download, no form.

The rest of the decorative finishes range

Gioia Decorative paint Oro Puro Metallic decorative finish Oro Bianco Metallic decorative finish Euphoria Bianco Marble chips and sequins Euphoria Oro Marble chips and sequins Fili di Seta Decorative interior paint Minimal Matt decorative interior paint Morbido Tocco Interior paint

Technical support for the design team

We supply the material and we apply it, so the specification and the workmanship sit with one party. Send a finishes schedule, an elevation or a mood board and we will come back with the system, the build-up, the sample programme and a completed clause.

Send your finishes schedule Visit the showroom
Continue
Delivered projectsWhere this system is already installed.The specification hubEvery product, family and document in one place.Upload a scheduleSend a finishes schedule or bill of quantities for review.See it in personEvery range on real walls, by appointment.