The product
A water-based coating for acoustic ceilings that carries the colour. Applied correctly it does not reduce the acoustic absorption of the ceiling beneath it, which is what separates it from ordinary paint — and it is the route to restoring an existing acoustic ceiling rather than replacing it.
Where it is used
- Colour coat on new Even Better installations
- Restoration of existing acoustic ceilings
Substrates
- Even Better acoustic plaster
- Existing acoustic ceilings
Application data
Coverage, thickness, mix and cure, as declared by the manufacturer. Site conditions in the Gulf sit at the top of most of these ranges — allow for it in the programme.
| Type | Water-based acoustic coating |
|---|---|
| Composition | Calcium carbonate, titanium dioxide, aluminium silicate |
| Equipment | Air-mix spray gun (Kremlin 30:25 or equivalent), two light passes |
| Coverage over Secern | Approx. 80 m² (861 sqft) per pail |
| Coverage over Sahara | Approx. 100 m² (1,076 sqft) per pail |
| Coverage over Silk | Approx. 120 m² (1,292 sqft) per pail |
| Drying time | 20 – 30 minutes; fully cured after 24 hours |
| Packaging | 18 litre (4.8 US gallon) pails |
Performance data
Every figure below is reproduced from the manufacturer's own technical data sheet, with the test standard it was measured against. The sheet itself is in the download section.
| Property | Result | Standard |
|---|---|---|
| Base | Water based | Fellert Acoustical Coating data sheet |
| Effect on absorption | No reduction in acoustic absorption when applied correctly | Fellert Acoustical Coating data sheet |
Where not to use it
The limits are as much a part of the specification as the performance. Everything here is stated on the manufacturer's data sheet.
- Must be applied with an air-mix spray gun. Roller or brush application is outside the manufacturer's method.
- Applied outside the manufacturer's method it can reduce the absorption of the ceiling beneath.
- Interior use.
Acoustic coating: Fellert Even Better Acoustical Coating by Styjl in colour [ref], applied by air-mix spray gun in two light passes over the Even Better acoustic plaster.
Square brackets mark the choices that belong to the project. Send us the finishes schedule and we will return the clause completed, with the sample and mock-up programme against it.
Documents
Every document is the manufacturer's own, reproduced in full and unaltered under our cover. Free to download, no form.
-
Fellert Even Better 1 Acoustic plaster · Product data sheet · 0.3 MBDownload (PDF, 0.3 MB)
-
Fellert Even Better 2 Acoustic plaster · Product data sheet · 0.3 MBDownload (PDF, 0.3 MB)
-
Fellert Even Better Access Panel Acoustic plaster · Product data sheet · 0.1 MBDownload (PDF, 0.1 MB)
-
Fellert Even Better Acoustical Coating Acoustic plaster · Product data sheet · 0.2 MBDownload (PDF, 0.2 MB)
-
Fellert Even Better Board Adhesive Acoustic plaster · Product data sheet · 0.1 MBDownload (PDF, 0.1 MB)
-
Fellert Even Better C-Channel Acoustic plaster · Product data sheet · 0.1 MBDownload (PDF, 0.1 MB)
-
Fellert Even Better Primer Acoustic plaster · Product data sheet · 0.1 MBDownload (PDF, 0.1 MB)
-
Fellert Even Better Primer Additive Acoustic plaster · Product data sheet · 0.2 MBDownload (PDF, 0.2 MB)
-
Fellert Even Better Spring Washer Acoustic plaster · Product data sheet · 0.1 MBDownload (PDF, 0.1 MB)
-
5.1 ICHC Direct Attachment to Ceiling Grid with Air Gap Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.10 OC Angled Soffit Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.11 OC Vaulted Ceiling Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.12 FIP Can Light Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.13 FIP Box Lightning Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.14 FIP Trimless Can Light Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.15 FIP Trimless Recessed Can Light Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.16 EJT Finish GWB Interface with Channel Reveal Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.17 EJT Open Expansion to Concrete Substrate Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.18 EJT Control Joint Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.19 EJT Ceiling Panel System Transition Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.2 EJT Concrete Beam Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.20 EJT Finish GWB Interface Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.21 EJT Linear Diffuser Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.22 EJT Square_Rectangle Shaped Diffuser Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.23 EJT Trimless Linear Diffuser Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.24 EJT Diffuser Hat Section Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.25 EJT Edging Diffuser Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.26 SS Adhered Cloud Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.27 SS Fellert Floating Cloud Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.28 FIP Invisible Audio Speaker Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.29 FIP Sprinkler Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.3 ICHC Ceiling to Wall Interface Fully Adhered System Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.30 EJT Column Transition Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.31 EJT Wall Application with Mesh Reinforcement Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.32 EJT Stair Ceiling and Riser System Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.33 ICHC Curved Ceiling to Wall Interface Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.34 EJT Finish GWB Vertical Interfacepdf Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.35 EJT Trimless Diffuser wo GWB Ripper Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.36 FIP EB Access Panel 1inch Board Direct to Grid Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.37 FIP EB Access Panel 1,5inch Board Direct to Grid Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.38 FIP EB Access Panel 1inch Board Direct to GWB Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.39 FIP EB Access Panel 1,5inch Board Direct to GWB Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.4 ICHC Plaster Substrate Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.5 ICHC On GWB without Acoustical Board Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.6 ICHC Concrete Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.7 ICHC Inside Corner for Walls and Ceiling Applications Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.8 OC Soffit to Fellert Vertical Wall Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
-
5.9 OC Soffit with Fellert to Vertical GWB Acoustic plaster · Assembly detail · 0.2 MBDownload (PDF, 0.2 MB)
The rest of the acoustic plaster range
Technical support for the design team
We supply the material and we apply it, so the specification and the workmanship sit with one party. Send a finishes schedule, an elevation or a mood board and we will come back with the system, the build-up, the sample programme and a completed clause.
